Electric Unicycle
Adjustable Jump-Blocks
3D printed adjustable Jump-Blocks
Soft and very comfortable TPU block & hard base plate.
Easy adjustable just by turning the outer TPU block (hight / forward / backward).
No more annoying search for the right, and especially symetric, position after changing shoes.
If you like freedom for normal riding, just turn it up. If you want fun on the trails or at the skatepark, just turn it down.
Fully foldable stock pedals without removing the Jump Blocks.
Big contact area without pain-inducing notches to be able to fold up the pedals a little bit.
Special shape or size on demand. (e. g. wider, bigger diameter or custom base plates)
Jump-Blocks, who needs them?
Many people think that Jump Blocks, also called Jump Pads or Foot Locks, are only suitable for offroad, BMX tracks, MTB trails or skateparks for jumping, but this is not correct in my opinion. They are also very useful on normal roads and additional a big safety feature. Whether it is to hop on the sidewalk or over bumps, potholes or other obstacles that you have seen too late and no longer manages to get around. Jump-Blocks keep your feet on the pedal and in the right position when going over bumps, potholes, bad roads or down / up the stairs. The danger of being thrown off the pedal would mean you lose control of the wheel and probably fall, even if you end up back on the pedal, but way too far forward.
In combination with my Power-Pads for stronger acceleration and braking, safety and performance is increased even further, as falling forward is largely prevented.
Available Jump-Block colors and reflectors
Extrem Bull - Commander
Base Plate Size: 110 x 170 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Gotway / Begode - Nikola
Base Plate Size: 120 x 170 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Gotway / Begode - MSX / MSP / RS
Base Plate Size: 103 x 170 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Gotway / Begode - EX / EX.N
Base Plate Size: 120 x 160 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Begode - Master / T4 / Extreme
perfect fit for NyloNove side plates
Base Plate Size: 105 x 160 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € Velcro hook side pre-installed
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Gotway / Begode - Hero
Base Plate Size: 120 x 170 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Gotway / Begode - Monster
Base Plate Size: 120 x 160 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Gotway / Begode - Monster Pro
Base Plate Size: 120 x 160 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Inmotion - V10 / V10F / V8 / V8F
Base Plate Size: 150 x 150 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Inmotion - V11 (first batch)
for early production models with 110 mm distance from pedal hanger to the both mounting screws
Base Plate Size: 133 x 144 mm
Standard width: 66 mm
include screws and 3M double sided tape
also available in width: 56 or 61 mm
max width: 86 mm (surcharge)
Price: 55,00 € *
Options:
+ 5,00 € per 5 mm wider than 66 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Inmotion - V11 (second batch)
for later production models with 65 mm distance from pedal hanger to the both mounting screws
Base Plate Size: 154 x 163 mm
Standard width: 66 mm
include screws and 3M double sided tape
also available in width: 56 or 61 mm
max width: 86 mm (surcharge)
Price: 55,00 € *
Options:
+ 5,00 € per 5 mm wider than 66 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Inmotion - V12
Base Plate Size: 150 x 150 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Inmotion - V13
Base Plate Size: 164 x 137 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Kingsong - 16X
Base Plate Size: 105 x 167 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Kingsong - S18
Base Plate Size: 137 x 143 mm
Standard width: 66 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Attention!
Due to the curved shape of the S18 shell, the base plate should be heated evenly in the front area and from both sides with a heat gun or a 1500W+ hair dryer and adapted to the shape of the shell by bending. The base plate would otherwise break. I recommend using Velcro over the entire surface.
Kingsong - S22
Base Plate Size: 105 x 160 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
+ full size side plates for Power-Pad installation here
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Leaperkim - Patton / Lynx
Base Plate Size: 105 x 160 mm
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 50,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Veteran - Sherman / Sherman MAX
Base Plate Size: 120 x 160 mm
incl. leveling plates (one side with double sided tape)
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 55,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 8,00 € hook & loop tape, 2pcs 150x200 mm
(for self-assembly)
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.
Veteran - Abrams
Base Plate Size: 180 x 160 mm
incl. leveling plates (one side with double sided tape)
Standard width: 65 mm
also available in width: 55 or 60 mm
max width: 85 mm (surcharge)
Price: 55,00 € *
Options:
+ 5,00 € per 5 mm wider than 65 mm (example)
+ 5,00 € per 5 mm bigger diameter
+ 6,00 € for reflective sticker
+ 10,00 € hook & loop tape, 2pcs 200x200 mm
(for self-assembly)
Attention!
If the levelling plates cannot be used for your desired mounting position, I recommend carefully heating and slightly bending the base plate of the Jump-Block so that it fits perfectly on the beveled shape of the housing. A hair dryer, fan heater or heat gun is sufficient for heating. I recommend to use Velcro.
Due to constant optimizations, the original images do not always correspond to the current version, but the 3D graphics correspond to the current version.