Electric Unicycle
Miscellaneous
Begode A2
Fairing plates - print file only
Fairing plates - print file only
this is only an STL print file for self-printing
a printer with a 400 x 400 mm print bed is required
these fairing plates can be easily replaced against the original side pads
the original screws can still be used
width: 13,5 mm
License:
No commercial use or public sharing of the 3D model
No modification or adaptation of the 3D model for public sharing or sale
No distribution, sale, donation or exchange of the digital files of the 3D model
only for private use
Price: 15,00 € * (only for the STL print file)
Begode Master
Unbreakable TPU headlight housing replacement
Unbreakable TPU headlight housing replacement
flexible TPU 3D-print
threaded M4 inserts for fastening the top cover
include 4 screws for the LED PCB
the original foam front part is no longer required
Wall thicknesses increased by 2 mm for more durability
(compared to the original headlight)the headlight is now basically also a bumper 😬
available colors see here
The conversion takes a few minutes and should be possible for everyone.
The LED PCB should be fitted with silicone sealant.
NOTE: Not compatible with NyloNove bumper. This housing requires approx. 5mm more space underneath and will not fit when using bumpers directly under the headlight.
Price: 25,00 € or 15,00 € (only for the STL print file) *
Begode Master
original size headlight housing replacement
original size headlight housing replacement
in this version, only the side brackets are reinforced by 2mm. All other dimensions correspond to the original headlight and are 100% compatible with all bumpers
hard plastic 3D-print
threaded M4 inserts for fastening the top cover
include 4 screws for the LED PCB
color: black
The conversion takes a few minutes and should be possible for everyone.
The LED PCB should be fitted with silicone sealant.
Price: 25,00 € or 15,00 € (only for the STL print file) *
Begode T4
Unbreakable headlight housing replacement
Unbreakable headlight housing replacement
flexible TPU 3D-print (also available in hard plastic)
threaded M4 inserts for fastening the top cover
include 4 screws for the LED PCB
Wall thicknesses increased by 2 mm for more durability
(compared to the original headlight)the headlight is now basically also a bumper 😬
available colors see here
The conversion takes a few minutes and should be possible for everyone.
The LED PCB should be fitted with silicone sealant.
NOTE: Not compatible with NyloNove bumper. This housing requires approx. 5mm more space underneath and will not fit when using bumpers directly under the headlight.
Price: 25,00 € or 15,00 € (only for the STL print file) *
Begode Master Headlight Upgrade
Conversion Kit to use a Begode Extreme Headlight
Conversion Kit to use a Begode Extreme Headlight
the Begode Extreme Headlight is much brighter than the Master or EX30 Headlight.
It doesn't solve the problem of dazzling others, but it does solve the problem of not being able to see anything in the dark. 😬
3D printed hard plastic
threaded M4 x 12 mm brass inserts for fastening the top cover
include 4 longer stainless steel screws
the original screws are used to mount the headlight in the bracket
ready to use my separately available beeper holder, which prevents the beeper from falling apart
Extreme Headlight is not included
Price: 25,00 € or 15,00 € (only for the STL print file) *
Begode Master (should also fit for EX30 / Extreme / T4)
Trolley bushings
Trolley bushings
play-free bushings that eliminate the wobbling of the trolley rods
hard plastic 3D-print
simply replace with the original bushings
This is not a copy of the bushings offered on Thingiverse, but based on my own measurements which fit better (at least on my Master )and did not have to be reworked
Price: 8,00 € *
TSG Pass / Predator DH6-X Helmet
Double Visor mount
Double Visor mount
allows 2 visors to be mounted at the same time
the outer cap is available in various colors
include longer stainless steel screws
include 2 inner spare parts
Price: 24,00 € *
Veteran - Sherman
Shell leveling plates
Shell leveling plates
useful for the perfect assembly of Power-Pads
thickness 3 mm
set of 6 pieces
Price: 10,00 € or 5,00 € (only for the STL print file) *
Options:
+ 5,00 € incl. 3M double-sided tape ready to stick on
Veteran - Sherman Max
Shell leveling plates
Shell leveling plates
useful for the perfect assembly of Power-Pads
thickness 0,8 mm
set of 6 pieces
Price: 10,00 € or 5,00 € (only for the STL print file) *
Options:
+ 5,00 € incl. 3M double-sided tape ready to stick on
Veteran - Sherman
Brackets and supports for DIY seats
Brackets and supports for DIY seats
each part is available separately
color: black
Price is valid for one part
Price: 8,00 € or 4,00 € (only for the STL print file) *